Brazil88 Posted May 15, 2018 Report Share Posted May 15, 2018 I have a newer 250 I got on here a while back, I tried fishing it last trip and noticed it wasnt gliding. I took the skin off and noticed there is water in the front half of the bait. However I cant seem to find the leak, nor can I get the water out. Is this bait done? Or can it be salvaged? Any ideas or suggestions? Quote Link to comment Share on other sites More sharing options...
Collin Posted May 15, 2018 Report Share Posted May 15, 2018 I think you can drill a small hole in the body and drain the water then epoxy the hole. Willluvstafish 1 Quote Link to comment Share on other sites More sharing options...
Willluvstafish Posted May 15, 2018 Report Share Posted May 15, 2018 ^ I would try what he said Quote Link to comment Share on other sites More sharing options...
Garrett Posted May 16, 2018 Report Share Posted May 16, 2018 Then epoxy all the joints and anywhere water can possibly get in otherwise you'll have to drill another hole and drain it again if the problem persists Quote Link to comment Share on other sites More sharing options...
Brazil88 Posted May 16, 2018 Author Report Share Posted May 16, 2018 That's exactly what I was thinking guys but wanted to get advice before I start drilling...thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.