Jump to content

paulito

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Posts posted by paulito

  3. Bearing upgrade

    in The Underground

    Posted

    On 5/26/2021 at 5:13 AM, rwp said:

    I don't disagree with anything you have said, but none of that equates to a performance increase when casting heavy baits. On a BFS reel everything you said can and will make a noticeable difference because getting the spool up to speed matters.

    When lobbing a heavy bait getting the spool up to speed isn't an issue, and like I said before, maximum spool speed is always too fast.

    Unless you are running your reel with zero brakes, zero spool tension, and zero thumb, changing the bearings will not make a bit of real world difference to the reels performance, even if the bearings are technically performing better.

    Actually, like you said, you have to step up the brakes when inserting ceramic bearings. 
     

    It does make a difference when casting glidebaits. Due to how a glide bait can bend and fold in flight, it’s horizontal rate and trajectory changes, which requires braking. When the bait bends, it causes resistance and slows down. However your thumb/brakes slow down the spool, but once the bait regains it’s tension on the spool, the ceramic spool will have less resistance to speeding up again and will help the bait cast further than if you had stainless steel. Also bearing smoothness is inversely related to bearing vibration. The vibration is sure to wear down where your spool shaft makes contact with your bearings. 
     

     

  4. Bearing upgrade

    in The Underground

    Posted

    1 hour ago, rwp said:

    Bearings are not the bottle neck in a reels performance, at least, assuming its a reel of decent quality with properly functioning bearings.

    The spool already spins too fast, which is why we have adjustable spool tension, adjustable brakes and/or a thumb.

    Bearings may or may not make a reel quieter, and may or may not make it (subjectively) smoother, but those are not performance increases.

    I’m gonna have to scratch my head when you say changing the bearings of making reel quieter and smoother are no performance increases.... I’m going to walk you through a basics physics analysis of what is going on when upgrading bearings. 
     

    YES, going from stainless steel to ceramic bearings does make is quieter and smoother, but why? What is the source of the noise? The noise is energy from the spool transferring to the bearing balls and inefficiently getting lost as sound energy. This “noise” is a good indicator of frictional forces that are preventing the bearing balls from glide/rolling on the track. Though some may find it hard to observe this increase in performance when upgrading from stainless steel to ceramic, when you look at your reel and a spool bearing goes bad, you can feel it right away! How smooth a reel is dependent on the bearings that stabilize the spool. Shimano reels with infinity drive and x-ship have a bearing on the spool that fit into the groove against the pinion gear bearing. If this bearing is ceramic, whether someone feels it or not, the performance of the bearing has definitely increased. This is because vibrations due to bearings are from rust/deformations of the track/bearing balls. Or right out of the box, it is caused by friction of the stainless ball bearings against the track and fluid forces of the grease that hinder the forward movement of the bearing balls. 

    Also, lubes these days boast “super speed” which basically means the lube has a lower viscosity which reduces the fluid/frictional forces by only lubricating a thin layer onto the moving parts. This also means the bearings have to be lubed more often. However, some ceramic bearings are so smooth that they can be run dry. However, once you lose the lube in stainless ball bearings, the balls start to degrade rapidly, causing uneven surfaces on the balls and more vibration, which ultimately hinders casting distance, effort needed to cast, and reliability of each cast. 

    In other words, there is definitely an increase of performance. 
     

    1 hour ago, Biggs said:

    This ^^
    flushing the stock bearings with acetone or simple green, let dry and re-lubing will get you some increased performance.
    The Hedgehog Studio bearings are good too. 

    be careful when flushing ceramic bearings with acetone or 90%+ alcohol. The bearing mount is hedgehog and zpi are made of plastic and the above-mentioned solutions can weaken/melt some plastics. 
     

    Final remarks: ceramic is better than stainless steel. However, ceramic is much more brittle than steel. I have had ceramic bearings go bad. To the OP, listen to @Bassmann86 and go with the ZPI SiC bearings. They are the most reliable and have the best performance. 
     

    As for what bearing sizes you need, hedgehog website has bearing swaps sizes for most Shimano and Daiwa reels.  If it does not have the info you are looking for, you are going to need to purchase a caliper and measure inner diameter(the hole where the spool shaft goes in), outer diameter (the size of the entire bearing, and the thickness(lay bearing down on it’s flat aide and measure how tall it is).

  5. Missing bait

    in The Underground

    Posted

    Hey! Despite what is claimed on the *estimated cost of bait, you can demand full coverage of your shipment! It should be an easy small claims case if it is a huge loss to you. Hope you get the bait. I feel that by pressing USPS to backtrack your shipment so they find a physical location for it, you are reducing the chances of a lost package by increasing the days the package is in limbo and harder to track

  9. Swimbait x Salt Reels

    in The Underground

    Posted

    Contrary to what someone above posted. You want to tighten the drag down all the way. Rinse with water, then dry with a towel. Lastlt loosen drag all the eay and let dry. Gotta tighten drag all the way to keep water out of drag washers. Also when you rinse, dont spray with a hose or turn your sink full blast. A trickle of water is best. Warm water is optimal to wash off the salt. I fish in san diego where i fish for bass and go saltwater in the same day. All my reels are fine. I use my calcutta conquest, abu revo toro beast 60, metanium mgl, and others in the salt and they are all fine

×
×
  • Create New...