Drew03cmc Posted March 26 Report Share Posted March 26 On 3/13/2024 at 10:33 PM, crappie25 said: Put the lure in the freezer for about 10 minutes take out and put in a bowl of warm water the leaks will show Found my leak in about 28 seconds flat It had cracked around the rear most weight in the head piece. I drilled about a 3/64 hole on the opposite side, sucked the water out and bought the Testors cement. On 3/15/2024 at 3:27 AM, chevro1et said: Kazki Hotta (known as KZ, a DRT field staff in AZ) just posted on his story about using low viscosity acrylic cement to seal cracks etc. in ABS baits. I applied the cement to the cracked area and let it hang overnight. I am going to apply another coat this evening and use a very small amount of JB Weld, Waterweld to seal the hole. I will then be testing for leaks after that. BPayne 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.