swimbaitrookie Posted January 5, 2011 Report Share Posted January 5, 2011 I have 2 joint floater that I'd like to make a slow sink, or heavy floater. I've modified lots of crankbaits to be suspending by drilling into the body and adding lead but I'm not so sure this is a good thing to do to a swimbait. Anyone got a recommendation, or two? Quote Link to comment Share on other sites More sharing options...
spotfisher Posted January 5, 2011 Report Share Posted January 5, 2011 Pm sent Quote Link to comment Share on other sites More sharing options...
Nicknick222 Posted January 5, 2011 Report Share Posted January 5, 2011 Ya it will work, just take some small cylindrical mojo type weights and tape them to the bottom until u get the right sink. Play around with where you place them from front to back to make sure the action isn't messed up and then drill a hole and drop some 5 min epoxy gel in to seal the deal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.