FishinGang916

If the numbers are uneven on baits to swap I can throw this in for someone. Just got add the bill and it's ready. Tune chamber to mess around with hi/low float options. 20240519_095125.mp4

Word, I've got an glide made from a master I have molded, I've never gifted or sold ( I don't really sell anything lol) any glides so it's technically unreleased lol 20240507_161012.mp4

Does it have to be a newly designed bait? Or can I add a bait I already make to this swap?

Been a while since I've made one of these 3pc wakes, just gotta add the lip and it's ready to fish 20240103_163616.mp4

Haven't had much build time lately but I managed this guy for a buddy lol still working on the Sacramento Perch color scheme 20240113_102213.mp4

Made a keeper tester so I had fun with the paint lol figured I'd fish the bank one direction then fish the opposite direction and the fish see 2 different offerings lol 20231208_153810.mp4

Thanks brotha you know I got one for you ! I'd love to see that Damascus scheme on one!

Heck yeah i can't wait to fish near bluegill beds this upcoming spring as well!

Thanks man ! That's what I'm going for forsure, a little of both for versatility, Ifish alotta ponds with my pops and his friends but they dont have setups for big swimbaits so I figured I'd make something they can throw. I'll have to send you a few once they are perfected and I get some fish on em lol

It walks well with small rod tip twitches , tail flips back and forth nice. I'll get a video on my next outing idk why I forgot to record one lol

Wanted a closer to true panfish profile bait around the size of my small fry but a bit thicker so I can get add more ballast for a better tune. So far I'm really digging it. I kept debating on scales or not. Went with no scales in the end. Got lucky on the 1st tune (never happens lol) and the action was great so made a few more to test the ratio/weight placement and was pleased. R&D continues . Lmk your thoughts so far. 20231124_124255.mp4 20231124_124205.mp4

For 2 part molds you build a box (most use legos) . Fill half with clay (sculpy) then trace your bait on clay and remove clay till you reach the center line of your bait. Add a few nubs and some vents in sections you feel may trap air to avoid inperfections. Rub clay with vaseline and pour the silicone. Once cured remove clay from bottom, flip it, box it , and repeat the vaseline rub then pour 2nd half. This is a rough draft so I'd watch a YouTube video for a visual demonstration. Check out solar baits

Well I finally molded this master lol need to gloss the master better for a smoother shiny cast. Also may change the pour hole location to make it easier for a insert to be added to the mold. Overall it came out OK for now. Biggest issue I've run into is denting towards the head of the bait. Thinking I'm pouring to hot. 10/0 beast hook fits good

Haven't tried a brownie lemme know what you think , still have face /fin details left

Did a crappie fading into shad type paint lol

Thanks brotha! I always tell myself keep em simple but I never can haha half the time I can't recreate what I did to save my life lol

Had a few blanks sitting i finally decided to throw together and paint

Welp it 110° in the shade lol so painting it is haha I was experimenting with differnt colorshit and interference powders and came up with this. Gives me some cool ideas to try next. Abstract Juvi 20230716_095344.mp4

What silicone are you guys using? I've been searching for something easier to get than flex 50 from alumilite

Thanks man! One day I'll be on your level ! For now it's one bait at a time lol

Lipless wake in Dark Juvi Trout

Here's a wake/crankdown for a SU member I've been working on. Slapped a purple crappie pattern on it and it's on to clearcoat 20230520_104348.mp4

Thanks man! Definitely nice to see the fishery still holds some quality fish that are willing to bite lol keeps the morale high to keep building hahah

Got a 6er to play with the glide yesterday! Ate it in 3 ft of water