bassturds Posted February 25, 2015 Report Share Posted February 25, 2015 just wondering how to change tails on the slammers. i bought 2 used and one of the tails is starting to rip! its the mini slammer! Quote Link to comment Share on other sites More sharing options...
lwhite115 Posted February 25, 2015 Report Share Posted February 25, 2015 just wondering how to change tails on the slammers. i bought 2 used and one of the tails is starting to rip! its the mini slammer! rip old worm out, pull metal pin out with needle nose pliers, put new worm in, put metal pin back in. Youll see the pin im talking when you rip out the old worm Quote Link to comment Share on other sites More sharing options...
Lurejerk Posted February 25, 2015 Report Share Posted February 25, 2015 Mini Slammers have the nail going in at a angle towards the nose of the bait. Just pull whats left of the old tail out. Use some needle nose pliers to push the nail back out enough from the inside, to grab it from the outside. After that clean out the inner area with a knife or flat screwdriver. Add locktite gel glue or suitable. Place your new worm in there flat side down then put your pin (NAIL) back through at the same angle let dry and your good to go. He uses Zoom trick worms as tails. Quote Link to comment Share on other sites More sharing options...
Lurejerk Posted February 25, 2015 Report Share Posted February 25, 2015 He beat me to it..... sorry we doubled up Just a note: Make sure you put the nail at the same angle these bait have thin walls, and because they are small. If you go straight in like the Big Slammers you will crack the otherside. Thats why they are at a angle to start with. Quote Link to comment Share on other sites More sharing options...
waynem Posted February 25, 2015 Report Share Posted February 25, 2015 I've taken ripped tails out of slammers, glued them back together with Mend-It, and put them back into the bait. They hold up about as well as new ones. Quote Link to comment Share on other sites More sharing options...
bassturds Posted February 25, 2015 Author Report Share Posted February 25, 2015 awesome thanks for the answers! i have some soft bait glue as well! the guy that sold them to me told me i can replace it but he never explained how! Quote Link to comment Share on other sites More sharing options...
MA Frog Man Posted February 25, 2015 Report Share Posted February 25, 2015 awesome thanks for the answers! i have some soft bait glue as well! the guy that sold them to me told me i can replace it but he never explained how! There's a video on YouTube Quote Link to comment Share on other sites More sharing options...
bassturds Posted February 25, 2015 Author Report Share Posted February 25, 2015 i need to start going on youtube more! Quote Link to comment Share on other sites More sharing options...
Baigh95 Posted February 26, 2015 Report Share Posted February 26, 2015 search ms slammer on youtube first video that pops up Quote Link to comment Share on other sites More sharing options...
bassturds Posted February 26, 2015 Author Report Share Posted February 26, 2015 did it last night! thanks guys!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.