JoshPerkins802 Posted August 15, 2018 Report Share Posted August 15, 2018 (edited) I've searched the threads and have not found an answer. I've called and emailed a lot of places to know avail. I'm looking to get my RYOGA SHRAPNELS serviced, bearings upgraded and new spools. I've even contacted Daiwa and they wouldn't do it. So please, anyone that knows a reel service place that has JDM parts or can get them please comment below. Edited August 15, 2018 by JoshPerkins802 Quote Link to comment Share on other sites More sharing options...
JoshPerkins802 Posted August 15, 2018 Author Report Share Posted August 15, 2018 *NOTE* I would like to get them serviced without sending them to japan. Lol Quote Link to comment Share on other sites More sharing options...
basskickinrednick Posted August 15, 2018 Report Share Posted August 15, 2018 http://www.thkustoms.com/Threeltuningandcleaning_LLC/Reel_Service. yev14 and evilcatfish 2 Quote Link to comment Share on other sites More sharing options...
JoshPerkins802 Posted August 15, 2018 Author Report Share Posted August 15, 2018 Email sent. Thank you. You are a gentleman and a scholar! basskickinrednick 1 Quote Link to comment Share on other sites More sharing options...
JoshPerkins802 Posted August 15, 2018 Author Report Share Posted August 15, 2018 Got what I needed folks. Trey is going to do what I need. Thanks @basskickinredneck basskickinrednick 1 Quote Link to comment Share on other sites More sharing options...
Drew03cmc Posted August 15, 2018 Report Share Posted August 15, 2018 (edited) Mike from Delaware Valley Tackle is the best I've ever seen. He will source parts and Supertune, etc. Great guy on top of it all. Edited August 15, 2018 by Drew03cmc Andrewwang1769 and NEbucketmouth19 2 Quote Link to comment Share on other sites More sharing options...
MTPanda Posted August 15, 2018 Report Share Posted August 15, 2018 www.tackletrap.com should be able to help too. They upgrade reels with jdm parts and sell them on their site. Im sure if you call them or email them they could help you out. I haven't used them personally but a friend has he highly recommends them or THKustoms Quote Link to comment Share on other sites More sharing options...
Volfan Posted August 16, 2018 Report Share Posted August 16, 2018 +1 on DVT. He does all mine and has built me rods. Great dude. Quote Link to comment Share on other sites More sharing options...
VAngler Posted August 16, 2018 Report Share Posted August 16, 2018 If you want a local guy, check out Matt Deschenes at Reel Kustom Reels. He's just north of Fredericksburg and he's been doing custom work on a wide variety of reels for a long time. Specializes in surf-casting reels for competitions. Quote Link to comment Share on other sites More sharing options...
JoshPerkins802 Posted August 16, 2018 Author Report Share Posted August 16, 2018 24 minutes ago, VAngler said: If you want a local guy, check out Matt Deschenes at Reel Kustom Reels. He's just north of Fredericksburg and he's been doing custom work on a wide variety of reels for a long time. Specializes in surf-casting reels for competitions. Will look into him! I'm about 1.5 hours south of Fredericksburg. THANKS Quote Link to comment Share on other sites More sharing options...
VAngler Posted August 16, 2018 Report Share Posted August 16, 2018 Yeah I've got some friends from Powhatan so I'm familiar with the area. Fredericksburg is a bit of a drive. Good luck with the reel JoshPerkins802 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.