chefchris Posted October 1, 2019 Report Share Posted October 1, 2019 1 hour ago, bbarnes52 said: Have you found any issue with the hook hanger being such a small loop? As compared to say a 1" closed eye hanger? None whatsoever, I run size 4-6 Rosco split rings without issue the inside diameter of the weighted hanger and the magnum screw eye is almost identical bbarnes52 1 Quote Link to comment Share on other sites More sharing options...
chefchris Posted October 1, 2019 Report Share Posted October 1, 2019 1 hour ago, bbarnes52 said: I got my order from lurepartsonline.com I have basically every part I think I will need to create on lure. I have a lip from toxic that fits his mink, as well as some left over eyes from sly blank, and a islide 185 tail. All these items have matched perfect to what I have drawn up. Can I use Loctite 2 part epoxy for my weighted hook hangers? Or should I just use super glue and then the baking soda and super glue method to cover the holes? I don’t mess with the super glue trick, never used it so personally can’t say anything positive or negative about it I use Devcon 2 ton two part epoxy, only one I’ve used and trust surfk9 1 Quote Link to comment Share on other sites More sharing options...
bbarnes52 Posted October 1, 2019 Author Report Share Posted October 1, 2019 1 hour ago, chefchris said: I don’t mess with the super glue trick, never used it so personally can’t say anything positive or negative about it I use Devcon 2 ton two part epoxy, only one I’ve used and trust Do you use that when insterting you joints and line tie as well? Quote Link to comment Share on other sites More sharing options...
chefchris Posted October 1, 2019 Report Share Posted October 1, 2019 38 minutes ago, bbarnes52 said: Do you use that when insterting you joints and line tie as well? Yes sir, I use it for almost everything as far as joint hardware/line tie/lip etc Quote Link to comment Share on other sites More sharing options...
VolunteerSwimbaits Posted October 1, 2019 Report Share Posted October 1, 2019 +1 On the D2T Epoxy Quote Link to comment Share on other sites More sharing options...
bbarnes52 Posted October 2, 2019 Author Report Share Posted October 2, 2019 5 hours ago, chefchris said: Yes sir, I use it for almost everything as far as joint hardware/line tie/lip etc Could I use the loctite 2 part epoxy? Quote Link to comment Share on other sites More sharing options...
azfisher Posted October 2, 2019 Report Share Posted October 2, 2019 You can use any glue or epoxy, but as mentioned above D2T is the best for what you will be trying to accomplish and get the 30 minute epoxy over the 5 min Quote Link to comment Share on other sites More sharing options...
azfisher Posted October 2, 2019 Report Share Posted October 2, 2019 I should have said you can use many glues or epoxies, D2T 30min is best. azsouth and surfk9 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.