azfisher

That should work well. Maybe a little too much coverage? Just guessing now

I've never used that brand of epoxy, but most epoxies tend to pull back or thin out around squared corners and sharp details as it cures. I'm perplexed by your "Hanging form a spinner", comment. Maybe a pic of the baits on the spinner could help figure out the "Runs" issue. I used Devcon 2 Ton epoxy, and mixed with a 10 grams of A, to 9 grams of B ratio, and just mixed up what I needed for the amount of baits I was clearing. With the D2T, I would mix in a few drops of de-natured alcohol after mixing the epoxy. This would thin the epoxy slightly and I would be able to get a few extra minutes of work time before it started to set up. The de-natured alcohol would also help dissipate the bubbles generated from mixing. Hope this helps...

Baby Possum X2

Don is a great guy to deal with, love Swimbait City!

I'm still in thinking mode...

Check out some of Engineered Angler's vids on Youtube. He's done some on resin ratios and how to ballast and weight placement. We all tend to do things a little different, so there's no one way that's right. I use Smooth-On products and still have a couple 5 gal buckets of Alumalite's micro balloons that I bought before they quit carrying them. Usually, lead shot goes where it wants, not where you want and makes dimples where it contacts the mold material. My .02...

Thanks for the opportunity, awesome of you!!

Are you offering to run it? You know what a bunch of whiny bitches us fisherman/bait builders can be!! I'd probably throw in...

ChefChris turned me onto the hole in the lip trick!

I've always used Dev-Con 2 Ton 30 minute epoxy, haven't had many issues with eyescrews , had a few lips come out tho. Fixed that by drilling a couple small holes in the lip where it rides in the slot so the epoxy goes thru the lip. The 5 min Devcon isn't waterproof.

I've had good luck in my area during the rain/rising water conditions. If fishing a developed lake at night, target the campground areas and the individual boat slips around the shoreline camps. Always rodents around campgrounds at night, especially if there's a picnic table and trash can near the waters edge. I do best tight to shoreline cover, tree lay downs and along tules. Baby Possum gets crushed

Some underwater swim footage... Hard pass for me

You know it!

Baby Possum gets bit really well, but tends to fish heavy. Make sure you have an appropriate rod. Throw rats in the rain...

Don't know if it has changed or not, but in the past Lowrance won't fix anything. They offer a discount on a new item. That's what happened to a couple guys I knew at the time...