Thiskidlikes2fish Posted May 2, 2021 Report Share Posted May 2, 2021 (edited) This is not a swimbait making specific question but relates. I have just switched over to using a scroll saw and I can’t find a blade thick enough to fit my lip slot. I have been using a 1mm blade which is perfect in my jig saw before this.I have tried using a thicker blade after to widen it but it has not worked. Any ideas on how to get it to the correct width would help. Edited May 2, 2021 by Thiskidlikes2fish Quote Link to comment Share on other sites More sharing options...
azfisher Posted May 2, 2021 Report Share Posted May 2, 2021 I use a table saw, when the wood is still square. My blade is 1/8 inch wide so it cuts a nice slot for standard polycarbonate. Thiskidlikes2fish 1 Quote Link to comment Share on other sites More sharing options...
lumpy Posted May 5, 2021 Report Share Posted May 5, 2021 pm sent Thiskidlikes2fish 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.