Bucketmouth559 Posted April 21, 2022 Report Share Posted April 21, 2022 I purchase this od rat from another member on here but wasn’t told about the tail screw (where tail screw on ) was missing or broke I really like the rat is this something that is repairable? Can I just add something to make it work or do I just send it back ??? Thanks for any advice Quote Link to comment Share on other sites More sharing options...
Loudsplashbassn_ Posted April 21, 2022 Report Share Posted April 21, 2022 He listed it in the description as it was..lol was one hell of a deal if you don't want it ill take it at the price you paid.. BiteTheBullet, ThatKidInNY, Bucketmouth559 and 2 others 3 2 Quote Link to comment Share on other sites More sharing options...
_freddyroots Posted April 21, 2022 Report Share Posted April 21, 2022 Older rats never had a screw… just use some good glue and let it cure Bucketmouth559 1 Quote Link to comment Share on other sites More sharing options...
azfisher Posted April 21, 2022 Report Share Posted April 21, 2022 (edited) Epoxy a corkscrew baitkeeper, like on an A rig, into the tail hole and you can screw on and off different tails Edited April 21, 2022 by azfisher Jim137a and NicePizzaBass 2 Quote Link to comment Share on other sites More sharing options...
chefchris Posted April 21, 2022 Report Share Posted April 21, 2022 17 minutes ago, azfisher said: Epoxy a corkscrew baitkeeper, like on an A rig, into the tail hole and you can screw on and off different tails this is the way to go another option is the way toxic does his minks, get a .072 screw eye, screw it in (make a small pilot hole first) and screw it in, slide the tail over it and use a toothpick to keep it in place NicePizzaBass and Bucketmouth559 2 Quote Link to comment Share on other sites More sharing options...
MEGAMAG119 Posted April 21, 2022 Report Share Posted April 21, 2022 I have the same issue. Dremel, Rod Bond and an owner center pin screw lock is my plan. Quote Link to comment Share on other sites More sharing options...
Staogtepi Posted April 22, 2022 Report Share Posted April 22, 2022 WTT the miralax? JacksonF, jmpatacsil, basskickinrednick and 1 other 4 Quote Link to comment Share on other sites More sharing options...
basskickinrednick Posted April 22, 2022 Report Share Posted April 22, 2022 2 hours ago, Loudsplashbassn_ said: He listed it in the description as it was..lol was one hell of a deal if you don't want it ill take it at the price you paid.. How cheap was it Quote Link to comment Share on other sites More sharing options...
xSoCalBassKingx Posted April 22, 2022 Report Share Posted April 22, 2022 I vividly remember that he put it in the description that the bait did not come with a tail screw because I was just a little to late to the party. Don’t try and call him out. Super glue a roboworm on there and call it good MA Frog Man, LowSpinner, Uknowme and 3 others 4 2 Quote Link to comment Share on other sites More sharing options...
Bucketmouth559 Posted April 22, 2022 Author Report Share Posted April 22, 2022 I don’t know what listing you guys are talking about this is the one I purchase it from never mention about tail screw lock … I was just asking about how to go about making it useable and thanks to all the great ideas that I can try out sounds like epoxy and center pin lock would work… I paid 150 for it Quote Link to comment Share on other sites More sharing options...
chefchris Posted April 22, 2022 Report Share Posted April 22, 2022 46 minutes ago, Bucketmouth559 said: I don’t know what listing you guys are talking about this is the one I purchase it from never mention about tail screw lock … I was just asking about how to go about making it useable and thanks to all the great ideas that I can try out sounds like epoxy and center pin lock would work… I paid 150 for it That’s because you paid double what he paid from the original poster, he clearly states the screw is missing and the tail and was $70, original post below which is the one everyone is referring too l Bucketmouth559, MEGAMAG119 and BiteTheBullet 2 1 Quote Link to comment Share on other sites More sharing options...
BPayne Posted April 22, 2022 Report Share Posted April 22, 2022 25 minutes ago, chefchris said: That’s because you paid double what he paid from the original poster, he clearly states the screw is missing and the tail and was $70, original post below which is the one everyone is referring too l Wooooooooow. I remember seeing this, but didn’t put the two together. Buy it for a steal and flip it for double immediately the same place you bought it from….that’s….cool chefchris and GregoSD 2 Quote Link to comment Share on other sites More sharing options...
GregoSD Posted April 22, 2022 Report Share Posted April 22, 2022 34 minutes ago, BPayne said: Wooooooooow. I remember seeing this, but didn’t put the two together. Buy it for a steal and flip it for double immediately the same place you bought it from….that’s….cool I ain’t surprised. Pretty messed up if you ask me. Tealsprig, Bucketmouth559, BrierBob and 2 others 5 Quote Link to comment Share on other sites More sharing options...
MEGAMAG119 Posted April 22, 2022 Report Share Posted April 22, 2022 6 minutes ago, GregoSD said: I ain’t surprised. Pretty messed up if you ask me. Almost offered on that thing from the serial flipper. Glad I didn’t. Already fell for the $150 broken OD earlier this year. Fblatini, BPayne and GregoSD 3 Quote Link to comment Share on other sites More sharing options...
BiteTheBullet Posted April 22, 2022 Report Share Posted April 22, 2022 Sorry to hear about this guys. I thought it would be put to good use and not flipped. Too each his own. No worries. Thanks for the backup about the post and original item description when I sold it for $70.. To the OP: these guys have some great responses for repair, take your pick. If you have any questions you can message me. You did good on the bait, don’t stress it. There’s something to be had for making repairs and then hitting success. I hope you stick a big ol rat slurper! - Rob B_larkin3, Bucketmouth559, xSoCalBassKingx and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.