WesMoran Posted February 28 Report Share Posted February 28 Additional Update: Looked for additional knob donor options last night. Noticed that Lew’s Custom Shop cork and EVA knobs have screw in caps as well. After inspecting some today, they are too large as well. Found that Academy carries carbon replacement handles branded under h2ox that seem to have similar caps, but upon inspecting those, it appears maybe those caps are glued in place. So those are also not suitable donors. Quote Link to comment Share on other sites More sharing options...
StoneCole Posted April 9 Report Share Posted April 9 On 6/19/2020 at 10:22 PM, NaCity said: Did you order concept A sleeves or concept A3 sleeves? Also if the hawgtech handle requires long sleeves then the concept A sleeves will not work and the sleeve come off @NaCity do the concept A and A3 have different sleeves? I’m considering doing this to my A3 if I can’t find a way to make a variable handle work. Quote Link to comment Share on other sites More sharing options...
LureFlyingAcrossThePond Posted April 9 Report Share Posted April 9 41 minutes ago, StoneCole said: @NaCity do the concept A and A3 have different sleeves? I’m considering doing this to my A3 if I can’t find a way to make a variable handle work. Concept is 7x4 so the Shimano Drt nuts should work Quote Link to comment Share on other sites More sharing options...
StoneCole Posted April 9 Report Share Posted April 9 3 hours ago, LureFlyingAcrossThePond said: Concept is 7x4 so the Shimano Drt nuts should work I thought I saw somewhere else in this thread that the Shimano nut is threaded to tighten to the left where 13 is threaded to the right? I could be mistaken though. Quote Link to comment Share on other sites More sharing options...
LureFlyingAcrossThePond Posted April 9 Report Share Posted April 9 13 minutes ago, StoneCole said: I thought I saw somewhere else in this thread that the Shimano nut is threaded to tighten to the left where 13 is threaded to the right? I could be mistaken though. Drt handles work with Gomexus nuts Quote Link to comment Share on other sites More sharing options...
brootalititties Posted April 9 Report Share Posted April 9 25 minutes ago, StoneCole said: I thought I saw somewhere else in this thread that the Shimano nut is threaded to tighten to the left where 13 is threaded to the right? I could be mistaken though. All brands will thread differently based on left or right hand retrieve….otherwise the handle would screw off on the retrieve. Chaozu and StoneCole 2 Quote Link to comment Share on other sites More sharing options...
StoneCole Posted April 9 Report Share Posted April 9 2 hours ago, brootalititties said: All brands will thread differently based on left or right hand retrieve….otherwise the handle would screw off on the retrieve. Good point lol Quote Link to comment Share on other sites More sharing options...
MurdaJ Posted April 9 Report Share Posted April 9 2 hours ago, brootalititties said: All brands will thread differently based on left or right hand retrieve…. True but i dont know why they are made that way, aren't the shafts and handles indexed with the rectangular cut? Seems that they could all be standard threading without issue Quote Link to comment Share on other sites More sharing options...
brootalititties Posted April 9 Report Share Posted April 9 45 minutes ago, MurdaJ said: True but i dont know why they are made that way, aren't the shafts and handles indexed with the rectangular cut? Seems that they could all be standard threading without issue Yur right and they also have locking plates. Probably has more to do with the drag than the locking nut Quote Link to comment Share on other sites More sharing options...
LowSpinner Posted April 10 Report Share Posted April 10 5 hours ago, LureFlyingAcrossThePond said: Drt handles work with Gomexus nuts Blasphemy! _freddyroots, LureFlyingAcrossThePond and Efrain 2 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.